Page 3 of News
31st International Plastic & Rubber Industry Exhibition

31st International Plastic & Rubber Industry Exhibition

  • Jan 27, 2021
  • Hits: 24

At the exhibition, Runma Intelligent showed trash bins being automatically taken out by the manipulator in the hot scene. At the early stage of the 31st International Plastic...

read more


Why Are 80% of Plastics Enterprises Using Robot Arms?

Why Are 80% of Plastics Enterprises Using Robot Arms?

  • Jan 18, 2021
  • Hits: 38

In plastic processing industry, many tasks are simple and repetitive, especially in injection molding, plastic suction, cup making, cutting-off, product packaging and in-mold labeling, which is particularly suitable...

read more


What Determines the Positioning Accuracy of Manipulator?

What Determines the Positioning Accuracy of Manipulator?

  • Jan 08, 2021
  • Hits: 38

At present, the positioning accuracy of truss manipulator can reach 0.02mm, and the repeated positioning accuracy can reach 0.01 mm. Therefore, the accuracy and stability of truss manipulator are also...

read more


Discussion on Traditional Injection Molding, High Speed Injection Molding and Precision Injection Molding

Discussion on Traditional Injection Molding, High Speed Injection Molding and Precision Injection Molding

  • Dec 21, 2020
  • Hits: 29

As we all know, the pursuit of injection molding is "high quality, high efficiency and low consumption", that is, the pursuit of profit maximization. However, the development of things needs...

read more


Why Applying Retarder instead of Motor Speed to Control Robot Arms?

Why Applying Retarder instead of Motor Speed to Control Robot Arms?

  • Dec 16, 2020
  • Hits: 34

With the continuous innovation of industrial age, the upgrate of equipment is getting faster. Factories now adopt certain automation equipment, some of which even apply full-line automatic operation....

read more


Automatic Degating and In-Mold Inserting of Robot Arms

Automatic Degating and In-Mold Inserting of Robot Arms

  • Dec 09, 2020
  • Hits: 129

With the upcoming Industry 4.0 and rapid development of intelligent equipment, traditional injection moulding industry begins to substitute robot manipulation for manual operation. Injection moulding...

read more


Automatic Intelligent Manipulator Promotes Injection Molding Industry—Part Two

Automatic Intelligent Manipulator Promotes Injection Molding Industry—Part Two

  • Dec 04, 2020
  • Hits: 20

As a traditional production enterprise, changing our production mode with manipulator is the only way to reduce the dependence of enterprises on employment, reduce production costs and realize sustainable...

read more


Parametric Design and Vibration Analysis of an Injection Robot Arm (Part Two)

Parametric Design and Vibration Analysis of an Injection Robot Arm (Part Two)

  • Nov 30, 2020
  • Hits: 35

Take the main arm beam of an injection robot arm as an example. See the Figure 2. The dimension features contained in Sketch 1 are D1@ Sketch1 and D2@ Sketch1. When the program is...

read more


Parametric Design and Vibration Analysis of an Injection Robot Arm(Part One)

Parametric Design and Vibration Analysis of an Injection Robot Arm(Part One)

  • Nov 17, 2020
  • Hits: 35

Abstract: With the development of the plastic industry, the combination of the injection molding robot arm and injection molding machine has become an inevitable development...

read more


Design and Analysis of an Injection Robotic Arm (Part Two)

Design and Analysis of an Injection Robotic Arm (Part Two)

  • Nov 10, 2020
  • Hits: 48

Design of picking components  The hands of the injection robotic arm can be specially designed according to the characteristics of the specific injection product to pick and place the product...

read more


Design and Analysis of an Injection Robotic Arm (Part One)

Design and Analysis of an Injection Robotic Arm (Part One)

  • Nov 05, 2020
  • Hits: 144

Abstract With the rapid development of the injection molding industry at home and abroad, the traditional manual material loading and unloading can no longer meet the needs of industrialization, and the...

read more


Automatic Intelligent Manipulator Promotes Injection Molding Industry—Part One

Automatic Intelligent Manipulator Promotes Injection Molding Industry—Part One

  • Oct 30, 2020
  • Hits: 27

In the background of Industry 4.0, injection molding industy has entered the era of shuffling, meager profit and transformation. Under the working environment of labor shortage, high cost and large labor...

read more


Advantages of the Robot Arm for Injection Molding Mahicnes

Advantages of the Robot Arm for Injection Molding Mahicnes

  • Oct 20, 2020
  • Hits: 48

For a traditional manufacturing enterprise, changing our production mode by using the injection molding machine manipulator is the only way to reduce the dependence of enterprises on employment,...

read more


What Are the Advantages of Using Manipulator on NC Vertical Lathe

What Are the Advantages of Using Manipulator on NC Vertical Lathe

  • Oct 11, 2020
  • Hits: 34

People who work in factories should know that loading and unloading is a repetitive and difficult job, and many people are unwilling to do this job. Nowadays, in the mechanized society, it increasingly...

read more


Robot Joint Breakthrough—Embrace the New Blue Ocean (Part Two)

Robot Joint Breakthrough—Embrace the New Blue Ocean (Part Two)

  • Sep 22, 2020
  • Hits: 22

Robot joint reducer is one of the core components of robot, and downstream system integration is the key to commercialization and large-scale popularization of robot. At present, there are few robot reducer...

read more


Robot Joint Breakthrough—Embrace the New Blue Ocean (Part One)

Robot Joint Breakthrough—Embrace the New Blue Ocean (Part One)

  • Sep 16, 2020
  • Hits: 24

With the development of intelligent manufacturing, 5G, automatic drive, artificial intelligence, accompanied with the disappearing of demographic bonus, robots not only replace human beings in military...

read more


Types of Bottle Blowing Machines

Types of Bottle Blowing Machines

  • Sep 08, 2020
  • Hits: 26

Bottle blowing machines are mainly divided into three categories: extrusion bottle blowing machines, injection bottle blowing machines and bottle blowing machines with special structures.   Processing...

read more


Purchase of Bottle Blowing Machine

Purchase of Bottle Blowing Machine

  • Sep 01, 2020
  • Hits: 15

1. Output: According to its own production output requirements, select machines of two output products at a time or four at a time which is in line with the required parameters from factory....

read more


The Difference between Bottle Blowing Machine and Blow Molding Machine

The Difference between Bottle Blowing Machine and Blow Molding Machine

  • Aug 25, 2020
  • Hits: 16

In a broader sense, a blow molding machine is also a kind of bottle blowing machine. Full-automatic bottle blowing machines include blow molding machines, hollow molding machines, injection...

read more


Installation of Bottle Blowing Machine

Installation of Bottle Blowing Machine

  • Aug 18, 2020
  • Hits: 13

1. The layout of machines. The layout of machines in the workshop should meet the convenience of mold replacement and maintenance. Generally, a space of 1~1.5 meters should be left around it. The distance...

read more